Guard Industry

GraffiGuard 2030 Ecological


graffiti remover 2030

GuardWash roof cleaning before and after
Effective Cleaners

GraffiGuard® 2030 Ecological




GraffiGuard® 2030 Ecological is the latest technology in graffiti & tag removal.  This graffiti remover is safe for the user, the environment and the ozone layer. It does not contain any chloride solvents, fluoride, oil NMPs or NEPs etc.

GraffiGuard® 2030 Ecological is designed to be used out of doors for removal of all spray paints and inks. It can be used on porous supports (brick, clinker brick, plaster, natural stone, concrete, rendering, wood, etc.). It can also be used on less-porous substrates and on substrates protected with ProtectGuard®.

GraffiGuard® 2030 Ecological is the first line treatment for any graffiti done in ink or paint.  It has a high level of viscosity. So it holds up well on vertical surfaces. This is important for removal applications where a long dwell time is required, such as unsealed, highly porous stone.

In areas frequently affected by Graffiti it pays to be proactive and apply an anti graffiti coating. Both ProtectGuard and ProtectGuard HD can be used to prevent penetration of paints and ink into porous surfaces. Graffiti can then easily be removed with GraffiGuard 2030 Eco without damaging the sealer.

For the ultimate in Anti Graffiti protection consider Super AntiGraffiti Guard®  – Multi Surface. This amazing anti graffiti coating eliminates the need for graffiti remover chemicals completely. All types of graffiti can be removed easily with just a low pressure, cold water pressure clean.

Additional information



Surface Area




  • Removes all types of graffiti
  • Non corrosive and non-irritating
  • Ready to use
  • Does not change materials


  • Porous or slightly porous mineral materials: natural or reconstituted stone, concrete, terracotta, tiling, etc.
  • Facades
  • External



  • Use the product in its pure form: do not dilute it.
  • Shake the packaging well before use and carry out a preliminary test.
  • For optimum results use GraffiGuard® 2030 Ecological on damp surfaces. In particular on porous surfaces, prior dampening of the surface with water prevents the ingress of paint dissolved in the material.
  • Apply plenty of GraffiGuard® 2030 Ecological, then wok it in using a brush.
  • Let it take effect for 10 to 15 minutes until the paint dissolves, then rinse with plenty of hot water under pressure.
  • If residue or paint stains remain, repeat the operation or use GraffiGuard® 2010.
  • Once the graffiti has been removed, rinse with surface with plenty of water.
  • Its effectiveness depends on the temperature; avoid applying at temperatures below 5°C.

Tools Required

  • Brush

Data Sheets

Safety Data Sheet

Technical Data Sheet


There are no reviews yet.

Be the first to review “GraffiGuard® 2030 Ecological”