Guard Industry

guard industry
1300 249 767
LOG IN
$0.00 Cart
Menu
$0.00 Cart
guard slip resistant

LONG LASTING NON-SLIP TREATMENT FOR SLIPPERY INORGANIC SURFACES

non slip surface treatment

 

protectguard concrete sealer
Effective Treatments

Guard Slip Resistant®

$430.00

Clear

Description

Guard Slip Resistant® is a revolutionary product which makes use of the silica contained in the materials and uses a chemical reaction to effectively graft new molecules onto the substrate materials, creating a non-slip surface.  It is more effective and longer lasting than other non-slip products on the market, while leaving the substrate practically unchanged.

Guard Slip Resistant® is a safe, eco-friendly product with a pleasant odour, which enables it to be used indoors and in closed-in areas.

Guard Slip Resistant® is used on inorganic surfaces composed of silica, including natural stone, concrete, terrazzo, tiles and enamel.  It is used throughout the residential and commercial sectors, wherever floors are slippery, especially when wet.

Additional information

Weight N/A
Dimensions N/A
Protection Type

Size

Surface Area

, ,

Advantages

  • Effective in one application
  • Does not alter the materials
  • Long-lasting effect
  • Non-corrosive and non-irritant

Uses

  • Slightly or very low porosity materials: ceramic, terrazzo, tiling, enamel, etc.
  • Floors
  • New or old
  • Internal and external
  • Recommended for patios, drives, pool surrounds, kitchen floors, etc.

Application

Preparing the material:

  • Apply the product to a clean, dust-free, grease-free and dry surface.

Application:

  • Use the product in its pure form: do not dilute it.
  • Shake the packaging well before use and carry out a preliminary test on a small surface area.
  • Pour or spray the product on the material. Check that the product is uniformly spread over the entire surface during treatment.
  • Do not leave the product to dry while it is being applied. Add some if necessary.
  • Let it take effect for 40 to 60 minutes.
  • After applying, rinse carefully with water.
  • The treated material can be used immediately.
  • Depending on the floor and the degree of resistance to friction desired, repeat the operation.

Tools Required

  • Low pressure sprayer or manual sprayer.

Data Sheets

Safety Data Sheet

Technical Data Sheet

Reviews

There are no reviews yet.

Be the first to review “Guard Slip Resistant®”

Related products