ImperGuard®

Application

Preparing the material:

• Apply the product to a clean, dust-free, grease-free and dry surface.
• To remove grease stains and traces of pollution use Guard Cleaner^® Facades or Guard Wash^®for traces of efflorescence, laitance or grout film use Guard Remover^® Eco Efflorescence & Cement.
• Rinse carefully until the surface is free of any trace of cleaner.

Application:

• Use the product in its pure form: do not dilute it.
• Shake the packaging well before use and perform a preliminary test to check that the product has correctly penetrated and the appearance after drying.
• The material must be impregnated up to saturation in a single coat or two coats “wet on wet” depending on the porosity.
• Always apply from bottom to top.
• Do not overload the material, remove any excess before drying. Risk of white marks.
• Protected drying: 24 hours.
• Optimum efficiency reached after 2 to 3 days.