Description
ProtectGuard® Color Two Component is similar to ProtectGuard® Color and is designed for areas more prone to graffiti. It has the addition of a primer and 2 pac hardener to firstly prevent inks from penetrating, and secondly allow for easier cleaning that will not damage the surface and not require re-application. Unlike a paint, it is a semi transparent product which does not interfere with the organic nature of the materials.
ProtectGuard® Color Two Component also protects against greasy stains, pollution and offers anti-graffiti protection that resists about 15 cleanings. The cleanliness of treated substrates is thus assured. This product is also environmentally friendly.
Guard Products are varied, and although we have 50 standard colours we can match and formulate custom colours to suit any project. In addition to this we can vary the transparency or opaqueness of any colour to enable the natural surface to show through as much as you require.
Application
Preparing the material:
- Apply the product to a clean, dust-free, grease-free and dry surface.
How to use:
On standard concrete:
- Apply Primer Guard® first to facilitate adherence.
On BFUHP:
- First apply Primer Guard® Special UHPC to facilitate adherence on enclosed concretes.
- Wait for at least 4 hours and a maximum of 48 hours before applying ProtectGuard® Color Two-Component. For further information, refer to the primer data sheet.
- Carry out a preliminary test.
Application:
- Mix well part A (base) with an electric agitator before use in order to obtain a homogeneous liquid.
- Add part B (hardener) to part A (base) without stirring. Stir carefully using an electric mixer for at least 5 min. Leave it to stand for half an hour then re-homogenise using an electric mixer before application.
- The prepared mixing can then be used for 4 hours at an ambient temperature of below 20°C.
Application of the first coat:
- In the event of extreme heat: The first coat can be diluted with 10% fresh water (potable). Mix well together.
- Apply the product to the material already treated with primer.
- Let it dry for an hour (at a temperature of 20°C).
Application of the second coat:
- For better control and full control of the rendering, it is recommended to apply the second coat using a HVLP type sprayer.
- Protected drying: 24 hours.
- Optimum efficiency reached after 5 to 7 days.
Reviews
There are no reviews yet.