ProtectGuard® Color

Application

Preparing the material:

• Apply the product to a clean, dust-free, grease-free and dry surface. To remove grease stains, traces of efflorescence, laitance or grout film, use pure Guard Remover^® Eco Efflorescence & Cement.

Application:

• Use the product in its pure form: do not dilute it.
• Shake the package well before use in order to fully homogenise the pigments with the rest of the composition
• Carry out a preliminary test.

Application with the HVLP :

• Application from bottom to top in a maximum of 2 to 4 diagonal applications depending on the desired appearance. Do not overload.
• Drying time between each coat: 15 minutes.

Apply with roller (only used for 100% opacity & non-textured smooth surfaces):

• Application from bottom to top in 2 or 3 coats using a brush, spread the product evenly on the material without overloading. If brush marks are left, even out with the short-nap roller
• Drying time between each coat: 30 minutes.
• Protected drying: 24 hours.
• Maximum efficiency reached after 7 days.