BUY MORE THAN ONE PRODUCT STOREWIDE AND GET 5% DISCOUNT!
TOTAL PROTECTION FOR ALL POROUS BUILDING SUBSTRATES
ProtectGuard® Natural Look Sealer. Repels Water & Oil
$200.00 – $690.00
- Description
- Additional information
- Video
- Advantages
- Uses
- Application
- Tools Required
- Data Sheets
- Reviews (7)
- Q & A (3)
Description
ProtectGuard – Natural Look Sealer
ProtectGuard is a natural look sealer that delivers outstanding protection to all types of porous materials. It is an eco, water based stone sealer that repels water, oils, stains and even graffiti. It comes with a 10 year guarantee and has been proven effective for over 20 years in some cases. It is currently protecting iconic structures all over the world. Such as Bernini’s Columns at St Peters Square at the Vatican, and the Louvre in Paris. ProtectGuard is the stone protection product of choice.
ProtectGuard helps tackle the deterioration caused by smog, greasy stains, and penetration of liquids. Treated surfaces will benefit from an increased life-span and will be easier to clean. Due to it’s high water repellency and vapour breathability, it keeps porous materials dry. This stops mould and mildew growth. And will be difficult for lichens and moss to become established. Your materials will stay healthy and clean.
ProtectGuard works by stopping stains from soaking into the substrate. It repels all kinds of liquids keeping them above the surface. They can then be easily cleaned off. Surfaces are much easier to keep clean when they are protected with this stone sealer. It even stops chewing gum from sticking to the surface, and allows for easy, residue free removal.
ProtectGuard is also an anti graffiti coating! It stops paint and ink from soaking into the pores of the material. It can then easily be removed from the surface with GraffiGuard 2030 Eco. Guard Industry have developed this safe eco cleaner specifically for use with ProtectGuard. It will safely remove the graffiti without damaging the ProtectGuard. The seal remains intact for ongoing protection. This is a very safe and effective means of controlling and managing graffiti. No other natural look sealer that can do that! Except perhaps, ProtectGuard HD.
ProtectGuard is suitable for indoor and outdoor use. It is designed for use on all types of porous building materials. Use with confidence on:
- concrete.
- cement.
- plasters.
- natural and synthetic stone.
- terracotta.
- paving and more…
ProtectGuard lets Materials Breathe
ProtectGuard does not product a surface film. This full penetrating sealer leaves the treated surface permeable to air and water vapour. This enables any moisture trapped in the material to escape. This is important for most outdoor sealing applications. Water always seems to get in somehow! There are a few applications where moisture issues are very common. These include:
- retaining walls.
- low or below grade floors.
- water features.
- paving around pools.
ProtectGuard is completely invisible after application. So it does not change the look or the texture of the treated surface. It is UV and frost resistant and does not change colour with age. Its also non slip! Since it does not produce a surface film it will not alter the natural grip levels of the material. As such, full penetrating sealers should always be used in areas where slips need to be minimised.
ProtectGuard is an Eco Sealer
ProtectGuard stone sealer is an environmentally friendly sealer. It is safer for applicators, end users and the environment. This eco sealer is:
- Water-based.
- Free from Petroleum solvents and silicone.
- Non hazardous and non toxic.
- 100% biodegradable.
- VOC < 2 g/l.
- Odourless
- 2008 Award of the “Éco Trophées 93”
Looking For Something Else? There is a Protect Guard Sealer for Every Application
ProtectGuard stone sealer is designed for use on high to medium porosity materials. It is ideal for materials like: concrete, plaster, terracotta and limestone. But if this isn’t what you are after, don’t despair! There is a Protect Guard Sealer to suit every application.
For high traffic applications consider Protect Guard HD. For very dense materials check out Protect Guard MG Eco. Its also food contact compliant! Or if you are after colour enhancement check out Protect Guard WF Premium wet look sealer.
A water droplet test is a handy way to check the porosity of your material. This is a good place to start when deciding which Protect Guard sealer is right for your application. Simply put a drop of water on the surface you want to seal. Time how long it takes for the droplet to soak in. Then check it against our selection chart.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Appearance | |
| Composition | |
| Protection Type | Anti Graffiti, Oil Repellent, Stain Repellent, Water Repellent |
| Size | |
| Surface Area | |
| Surface Type | Porous Surface (sandstone, concrete, limestone, brick, roof tile etc) |
Video
Advantages
- Protects against water, oil , stains and graffiti
- Does not form a film, lets the material breath
- Odourless and invisible: does not change the colour
- UV and frost resistant
- Slows down ageing and makes maintenance easier
Uses
- Porous materials: natural or reconstituted stone, concrete, terracotta, coating, etc.
- Floors and facades
- New or old
- Internal or external
- Recommended for patios, drives, pool surround areas, walls, gables, tiling joints, etc.
Application
Preparing the material:
- Apply the product to a clean, dust-free, grease-free and dry surface. To remove stains and traces of pollution use Guard Wash®, for grease stains, use Guard Cleaner® Eco Soiled Floors and for traces of efflorescence, laitance or grout film, use Guard Remover® Eco Efflorescence & Cement.
- Rinse carefully until the surface is free of any trace of cleaner.
Application:
- Use the product in its pure form: do not dilute it. Shake the packaging well before use and carry out a preliminary test.
- The material must be impregnated up to saturation in a single coat or two coats”wet on wet”.
- Do not overload the material, remove any excess before drying.
- On vertical materials, apply from bottom to top
- Protected drying: 24 hours.
- Optimal efficiency reached after 7 days.
Tools Required
- Low pressure sprayer, roller or brush
Data Sheets
7 reviews for ProtectGuard® Natural Look Sealer. Repels Water & Oil
Q & A
store manager 
(0)
(0)
store manager
(0)
(0)
store manager
(0)
(0)
Ask a question
Your question will be answered by a store representative or other customers.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Chris Thorne –
Hi,
My name is Chris Thorne and I wrote my first Testimonial on Guard Industry product over 2 years ago, I would like to update my Testimonial and let you know I am still using Guard Industry’s cleaning and sealing range.
As an Accredited Sealer Applicator my go to sealers are Guard Industry’s ProtectGuard® or ProtectGuard® HD Sealers as they are a water base penetrating sealer, 100% Biodegradable, has a 10-year effectiveness guarantee and very user friendly.
There are no hidden secrets in the “how to use” instructions, for large jobs I prefer to apply the ProtectGuard® Sealer using a sprayer and wiping of the access using a lamb’s wool applicator. Smaller jobs I use a fence paint brush or a lamb’s wool applicator to apply the sealer and use a microfibre cloth to wipe of the access.
Please remember the key to a good sealing job is preparation and for this I use Guard Wash® or Guard Wash® Express as it eliminates organic contaminates on all materials.
Anonymous (verified owner) –
Worth the money
Anonymous (verified owner) –
Very good water repellent
Paul D. (verified owner) –
Bit early to judge, but it went on easy and I am hopeful it will protect my sandstone wall for many years
Anonymous (verified owner) –
James C. (verified owner) –
Excellent product, highly recommend
Peter Cowan (store manager) –
Good Afternoon James,
I just read your review, I have found your order below, I wish you had come to us earlier with this issue so we could help you resolve it. If you wish to collect you can tomorrow from either Mulgrave (Granite Works) or Altona (Chemical Warehouse) or I will personally deliver to your house by COB Tuesday. Please advise?
I booked the courier on the 22/10 and sent the order to our warehouse on the same day as you ordered it, due to delays outside our control it wasn’t collected until the 28/10 however it does now seem to be sitting in limbo with no tracking updates. We will try to get this returned to us or send you a return label when it does arrive. Unfortunately this was showing on our side as completed so we had no reason to chase it up any further, I can only again apologies for this and have passed on your message along with our disappointment to the courier company.
Kind Regards,
Peter
Ronald Gray (verified owner) –
James Vander Ros (store manager) –
Apologies for the slow delivery. Unfortunately shipping delays are common at the moment due to a number of factors. Such delays are outside our control. The tracking shows it is due for delivery today. Once you have used the product please consider revising your review so that our customers get good feedback on the product performance.