Guard Industry

ProtectGuard CE Concrete Sealer Logo

WATER/OIL REPELLANT AND STAIN PROTECTION FOR CONCRETE

Compliant with Standard EN 1504-2
✓ Non-film forming impregnation sealer
✓ Water repellent, stain & graffiti protection
✓ UV resistant & doesn’t yellow with age

“These guys know their stuff.
They were very generous with their time and helped me find the best solution for my issue. The recommended products and application advice was spot on. Thanks heaps!
Jim, Dianella WA

 

ProtectGuard® CE – Special Concrete Sealer

$165.00$1,595.00

Payment Logos

✓ All Prices Include GST
✓ All Orders Fulfilled from Australian Stock
✓ View our Shipping & Returns Policy here

ProtectGuard CE Concrete Sealer Logo

WATER/OIL REPELLANT AND STAIN PROTECTION FOR CONCRETE

Compliant with Standard EN 1504-2
✓ Non-film forming impregnation sealer
✓ Water repellent, stain & graffiti protection
✓ UV resistant & doesn’t yellow with age

“These guys know their stuff.
They were very generous with their time and helped me find the best solution for my issue. The recommended products and application advice was spot on. Thanks heaps!
Jim, Dianella WA

 

ProtectGuard® CE – Special Concrete Sealer

$165.00$1,595.00

Payment Logos

✓ All Orders Fulfilled from Australian Stock
✓ All Prices Include GST
✓ View our Shipping & Returns Policy here

Description

ProtectGuard CE Concrete Sealer Logo

ProtectGuard® CE Concrete Sealer

ProtectGuard® CE is the best in class product for protection of concrete. It penetrates deep into the substrate to provide protection against water, oils chlorides, carbonation and graffiti. Concrete treated with ProtectGuard CE will benefit from increased lifespan and be easier to maintain. 

ProtectGuard CE is a non film forming impregnation product that repels liquids while allowing the concrete to breathe. ProtectGuard CE is completely colourless after application and does not alter the appearance or texture of the treated surface. It is UV resistant and will not yellow with age.

ProtectGuard CE is a CE certified product that meets the requirements of standard EN 1504-2 for protection of concrete.

ProtectGuard® CE  simply makes concrete better.

 

 

ProtectGuard CE is a Breathable Sealer

Breathable Sealer DiagramProtectGuard CE concrete sealer is suitable for both indoor and outdoor applications. Use for walls or flooring. It is a impregnating type sealer which does not create a surface film. Materials remain permeable to air and water vapour. This allows the surfaces to breathe. Surfaces stay clean and healthy. Moisture in the substrate can escape as water vapour without any negative impacts on the sealer. This is especially important where rising damp is an issue. Film forming sealers cannot breathe and will delaminate, blister and peel under such conditions.

It has a high level of abrasion resistance, so its fine to use on floors. It is UV and frost resistant and does not discolour with age. Since it doesn’t produce a film on the surface it won’t alter the natural slip levels of the surface.

Additional information

Weight N/A
Dimensions N/A
Appearance

Natural Finish

Composition

Eco-Solvent Based

Protection Type

Oil Repellent, Stain Repellent, Water Repellent

Size

1 Litre, 20 Litre, 5 Litre

Surface Area

Bench, Floor, Indoor, Outdoor, Wall

Surface Type

Polished, Very Low Porous Surface (Marble, Polished Concrete, Porcelain etc)

Advantages

  • Protection against water, stains and chlorides
  • Prevents corrosion of reinforcements
  • Compliant with Standard EN1504-2
  • Does not form a film, lets the material breathe
  • Invisible
  • UV and frost resistant
  • Delays ageing and makes maintenance easier

Uses

  • All types of concrete: standard, reinforced, fibre, high-performance (UHPC, GRC)
  • Facades, walls and floors
  • New and old
  • Exterior and interior

Application

Surface preparation :

  • Apply the product to a clean, dust-free, grease-free and dry surface.
  • To remove traces of efflorescence, laitance or grout film, use Guard Cleaner® Surface Preparation.
  • To remove grease stains, use Guard Cleaner® Maintenance.
  • Rinse carefully until the surface is free of any trace of cleaner.

Application:

    • Use the product in its pure form: do not dilute it.
    • Shake the packaging well before use and carry out a preliminary test.
    • Apply the product to saturation in a single coat or two coats”wet on wet”.
    • Do not overload the material.
    • The surface must be protected for 24 hours (rain, grease, etc.).
    • Optimum efficiency of the product obtained after 7 days.

    For further information, refer to the data sheet and safety sheet.

Tools Required

  • Apply using a low-pressure sprayer with viton seals, an airless sprayer, a roller or a brush.

Data Sheets

Safety Data Sheet

Technical Data Sheet

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0